Table of Contents
Advertisement
Tuner features
Station Preset Memory
Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
1
Select the band/ station that you want to have stored.
2
Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.
Switching Display for Tuner
You can change the display used when listening to the radio.
Switching the Display:
Pressing the CLK button switches the display as follows.
Select the Radio Text Display mode.
Programme Service name (during RDS station reception)/Station frequency
Radio text
Clock
Date
Displaying Frequencies:
Hold down the CLK button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
• If the RDS station currently tuned to is transmitting no text
whilst the Radio Text Display mode is turned on, "NO TEXT" will
appear in the display. Whilst awaiting reception, "WAITING" will
be displayed.
• The £ indicator lights whilst the clock is displayed.
2WARNING
To prevent accidents, drivers should not look at the display whilst
on the road.
— 10 —
Advertisement
Table of Contents
