Connection With A Tv Or Stereo System - Kenwood DV-6050 Instruction Manual

Connection with a TV or Stereo System

12
(Select the video connection method according to the TV in use)
To color difference (C
S Video connection: To S Video input connector
When S-Video cable is connected, the ordinary video connection is not necessary.
Audio/Video connection: To Audio, Video input jack
Audio connection: To audio input jacks
Component video connection:
C ) input jack
R, B
To luminance (Y) input jack
Component video cable (optional)
S Video cable (optional)
Audio/ Video cable (provided)
Audio cable (optional)
COMPONENT VIDEO OUTPUT switch :
Select the scanning method of the Component Video output using the
COMPONENT VIDEO OUTPUT switch on the rear panel.
INTERLACE: Scanning method is fixed at interlaced scanning.
PROGRESSIVE: When progressive scanning is unavailable with certain
discs, the scanning method is switched automatically to interlaced
scanning. When the scanning method is changed, the scanning status
will be displayed for a few seconds.
Chapter 1: Connection of Equipment
TV
Stereo system