Kenwood DV-6050 Instruction Manual page 46

Operation procedure
1.
While the player is in stop mode, press the SET UP
button to display the "MAIN" menu of "SET UP
MENU".
2.
Press the ENTER button to open the setup screen.
MAIN
7 Level 8
Rating
TV Aspect 7 4:3
TV Mode 7 Letterbox
TV Monitor Type 7 Standard
DVD VIDEO Mode 7 Off
MENU
OSD Position 7 Normal
On Screen Message 7 On
IPB Display 7 Off
3.
In the setup menu, select the Function Item (refer to
Right Table) by pressing the cursor up/down button
and press the ENTER button.
4.
Select the Setting Item (refer to Right Table) by
pressing the cursor up/down button, then press the
ENTER button to enter the selection in memory.
¶ "
" : Select to return to the previous screen.
46
Table : SET UP MENU "MAIN" Function & Setting (2/2)
Function Item
Icon
DVD VIDEO Sets the play mode of DVD discs.
Mode
Sets the position of the OSD (On-
OSD Position
Screen Display).
EXIT
On Screen
Switches the on-screen message on/
Message
off.
IPB Display
Switches the IPB display on/off.
This setting is reset to default "Off" when the disc is changed or the power is set to off or standby.
*
Function Icon
On Select to play only the DVD VIDEO part in a
DVD VIDEO/DVD AUDIO mixed disc.
Off Select to play only the DVD AUDIO part in a
DVD VIDEO/DVD AUDIO mixed disc.
Normal Select to display the OSD and messages on the
top of the TV screen. Usually select this setting.
Cinema Select to display the OSD and messages on the
lower part of the TV screen. Select this setting
when the OSD or messages are deviated outside
the TV screen.
On Select to display on-screen messages.
Off Select to not to display on-screen messages.
On Select to view the IPB display.
Off Select to not to view the IPB display.
Chapter 6: Various Setups
Setting Item
Means
Initial
Position
Off *
Normal
On
Off