Add Preset Points; Preset Point Sequence View - Planet NVR-420 User Manual

4-ch with hdmi

Hide thumbs Also See for NVR-420:

Table of Contents

7.2.1 Add Preset Points

Move the selection focus to the "Add preset point" icon and press the "ENTER"

button on the remote control to add the current live video as a preset point.

Once you have multiple preset points added, press the "Down" button on the

remote to select the "Preset point sequence viewing" icon. Press "ENTER" button

on the remote control to start sequence viewing between previously added preset

points. Press "ENTER" again to stop.

When the focus is on "Preset point sequence viewing" icon, press the "Right"

button to move the focus to the preset point sequence viewing interval drop-

down menu. Press the "ENTER" button on the remote to pull down the menu and

use "Up" and "Down" buttons on the remote control to move between selections.

Press the "ENTER" button again to make the selection.

4-CH H.264 Network Video Recorder with HDMI

User's Manual of NVR-420

Table of Contents