Table of Contents
Advertisement
4-CH H.264 Network Video Recorder with HDMI
User's Manual of NVR-420
6.2.4 PTZ Preset Sequence
Once you have multiple preset points defined for a camera, it is convenient for
monitoring to set up the sequence viewing among those preset points and let
the recorder automatically switch between them for you.
To configure preset sequence for a camera," select a camera from the
"Camera" drop-down menu.
The available preset points should be listed in "Camera Preset" section.
Pick the ones you like for sequence viewing and press the "->" button to move
them to the "Adjust Position" section and then use the up and down buttons to
adjust their sequences.
Finally, select a dwell time from the drop-down menu and click "Apply" to save
the configuration.
57
Advertisement
Table of Contents
