Table of Contents
Advertisement
Reboot cameras directly from the NVR.
Perform firmware upgrade.
Back up the NVR's settings to a local hard drive.
Restore the NVR's settings from a previously saved configuration file.
Reset the NVR's settings to their factory default values.
Rebooting the NVR
Reboot NVR-401 after you upload a new firmware. You would need to manually
reboot the system for the new firmware to take effect. Such process would prevent a
recording from getting interrupted because the system would not automatically reboot
itself after the new firmware is loaded onto the recorder.
Simply click "Restart" to begin the reboot process and confirm the action.
The restart process should be displayed and you should be prompted back to the
"Maintenance" page after it is complete.
Resetting the NVR to Factory Default
To reset the recorder back to its factory default, click "Default" button and begin the
process.
4-CH H.264 Network Video Recorder with HDMI
72
User's Manual of NVR-420
Advertisement
Table of Contents
