Connect; Disconnect; Enablelsb - BIXOLON SRP-F310 Reference Manual

5-3-6 connect

Connect to target printer.
[Function prototype]
- (BOOL)connect
[Discussion]
This method not works
when AutoConnection is setting in BXL_CONNECTIONMODE_AUTO(default, == 0)
Target of BXPrininterController property should be set in advance.
[Availability]
SDK 2.0.2 and later

5-3-7 disconnect

Disconnect to connected printer.
[Function prototype]
- (void)disconnect
[Discussion]
This method not works
when AutoConnection is setting in BXL_CONNECTIONMODE_AUTO(default, == 0).
[Availability]
SDK 2.0.2 and later

5-3-8 enableLSB

Enable to Last status back.
[Function prototype]
- (long)enableLSB:(BOOL)bEnable
[Parameters]
bEnable
LSB Enable.
FALSE : LSB Disable
TRUE : LSB Enable
[Return Value]
Refer to 2-16 Result Code
[Availability]
SDK 3.0.0 and later
Rev. 2.00 - 23 -
POS Printer