SRP-Q200
4. How to Connect
WLAN can be configured through the printer's WLAN interface. Likewise, WLAN can also
be configured though the printer's USB interface.
4-1 Connecting Printer
4-1-1 USB cable
Connect USB cable to Printer, PC device.
Use the "Net Configuration Tool" to adjust the settings.
4-1-2 WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to
the LAN/wireless network
A P
<Infrastructure mode>
In order to configure the network between the wireless host device and the printer, set the
printer to Soft AP Mode.
<Soft AP mode>
* Soft AP mode is only supported on WLAN.
- 5 -
Ver. 1.00