How To Connect - BIXOLON SRP-B300 Network Connection Manual

Thermal receipt printer

Hide thumbs Also See for SRP-B300:

3. How to Connect

1) Checking Network Setting

Cover Open Lever

After the printer has finished booting, open the printer cover and press and hold the FEED

button for 5 seconds. This will cause the interface setting confirmation mode.

Then add the paper, close the cover, and check that the following message is printed.

Checking Interface Setting

0: Exit

1: LAN Information Print

2: LAN Factory Reset and Reboot Printer

3 or more: None

Select Modes by Feed button control

as below.

Step 1. Short-press as many times as

The mode number to choose.

Step 2. Long-press over 1 second.

*e.g. To choose Mode 2, press Feed

Button 3 times(short-short-long)

If the above message is printed, select Mode 1, and you will see the following LAN data.

(To select Mode 1, press the Feed button once quickly/ once long.)

Ver. 1.00

- 4 -

SRP B300

Feed Button

Table of Contents