How To Connect (Printer Only) - BIXOLON SRP-Q300 Connection Manual

SRP-Q300/302

3. How to Connect (Printer only)

WLAN can be configured through the printer's WLAN interface. Likewise, WLAN can also
be configured though the printer's USB interface.
(1) Connecting Printer
1) USB cable
Connect USB cable to Printer, PC device.
Use the "Net Configuration Tool" to adjust the settings.
2) WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to
the LAN/wireless network
A P
Infrastructure mode
In order to configure the network between the wireless host device and the printer, set the
printer to Soft AP Mode.
Soft AP mode
- 4 -
Rev. 1.01