Table of Contents
Advertisement
Receiver E-mail
5.8 PTZ & RS-485 Setup
The DVR allows users to control PTZ functions of your camera. To enable PTZ function,
the 485 cable should be connected to the RS-485 port of DVR.
Item
Enable PTZ
Protocol
PTZ ID
Baud Rate
RS-485 ID
RS-485 Baud Rate
Keyboard
circumstances happen: Motion, Sensor and Vloss (Video Loss).
Enter to set up e-mail addresses for up to 10 receivers individually.
Click the box to Enable/Disable PTZ function for each channel.
Set up the protocol of PTZ cam.
Click or press ◀ ▶ to set up PTZ ID. The valid ID value is from 1 to 64.
Select Baud Rate for PTZ from 2400、4800、9600 、19200
Reserved.
36
Description
Advertisement
Table of Contents
