Planet DVR-872 User Manual page 49

Item
Mouse Speed
Key Tone
Alarm Buzzer
Alarm Relay
5.9.4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot
video output. SPOT setup is for controlling orders of channels that the system cycles
through in SPOT mode. User can monitor every channel in the SPOT mode.
Item
Auto-Seq. Interval
(Seconds)
Enable Spot
Skip Video Loss Channel
Channels
Adjust the mouse moving speed
Buzzer & Relay Setup
Enable/ Disable keystrokes.
Enable/ Disable buzzer operation when the alarm is triggered for HDD
error, sensor, motion and vloss (Video Loss).
Enable/ Disable the signal to be sent to the RELAY OUT blocks when the
alarm is triggered for HDD error, sensor, motion and vloss.
The duration interval time between channels is in seconds under SPOT
mode (1~999 seconds).
When setting "Enable Spot", the "MAIN/SPOT" BNC terminal will be
confined/restricted to Spot output port only.
Whether to skip channels without video signal.
Select which channels will be displayed in the sequence.
43
Description
Description