Sensor Setup - Planet DVR-872 User Manual

Item
Mask Mouse Selection
All Area Detection
Mask All Area
Continue
Exit & Save
Exit & Discard

5.3.2 Sensor Setup

Item
Alarm Duration(Seconds)
Sensor Popup
Sensor Popup
Sensor Polarity
All off
All Low
All High
Select to mask the mouse selected area.
Select all the images as motion detection area.
Cancel all motion detection images on the screen.
Continue setup.
Save setup and exit setup page.
Cancel setup and exit setup page.
Alarm duration time (1~60 seconds).
Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Click or press ▼ to select between HIGH/ LOW voltage for triggering
sensor detection or OFF to turn off polarity for each channel
Low Polarity：Sensor has not been triggered. When connected, sensor
will be turned on.
High Polarity：Sensor has been triggered. When connected, sensor
status will be turned off.
Off：Sensor is deactivated, and will not be turned on/off.
Set all sensors polarity to off.
Set all sensors p
olarity to low level.
Set all sensors p
olarity to high level.
24
Description
Description