JVC KD-A925BT Instructions Manual page 32

Cd receiver
Hide thumbs Also See for KD-A925BT:
Table of Contents

Advertisement

Menu item
EQ
Time Alignment
D. T. Expander *
Fad/Bal *
Loud *
10
Volume Adjust
Subwoofer On/Off
Subwoofer Level *
Subwoofer Phase *
X'over HPF/LPF
Beep
Amplifier Gain *
*
7
No effect in case of CD-DA and Bluetooth audio.
*
8
If you are using a two-speaker system, set the fader level to <00>.
*
9
This adjustment will not affect the subwoofer output.
*
10
If SOUND 1/ 2/ 3 is selected as the sound mode (page 26), you cannot make any setting. "Fix (My Sound)"
appears.
*
11
Displayed only when <On> is selected for <Subwoofer On/Off>.
*
12
The volume level automatically changes to "Vol 30" if you change to <Low Power> with the volume level set
higher than "Vol 30."
32
ENGLISH
For settings, see page 26.
For settings, see page 27.
7
On : Digital Track Expander feature compensates high frequency sound for
compressed digital tracks (eg. digital music sources). / Off : Cancels.
• Digital Track Expander effect can be heard in the following conditions:
MP3/WMA: Bit rate: 64 kbps to 128 kbps; Sampling frequency: 44.1 kHz, 48 kHz
only
iPod/iPhone music files: Sampling frequency: 44.1 kHz, 48 kHz only
Fad (fader) : F6 — R6 [ 0 ] : Press 5 / ∞ to adjust the front and rear speakers
8,
*
9
output balance. /
Bal (balance) : L6 — R6 [ 0 ] : Press 4
and right speakers output balance.
Loud1/ 2/ 3 : Boost low and high frequencies to produce a well-balanced
sound at a low volume level. / Off : Cancels.
Level –5 — Level +5 [ Level 0 ] : Presets the volume adjustment level
of each source (except "FM"), compared to the FM volume level. The volume
level will automatically increase or decrease when you change the source. Before
adjustment, select the source you want to adjust. ("FIX" appears on the display if
"FM" is selected as the source.)
On : Turns on the subwoofer output. / Off : Cancels.
11
Level 00 — Level 10 [ Level 05 ] : Adjusts the subwoofer output level.
11
0 Deg (normal) — 180 Deg (reverse) : Selects the subwoofer phase.
For settings, see page 29.
On / Off : Activates or deactivates the keypress tone.
12
Low Power : Vol 0 – Vol 30 (Selects if the maximum power of each speaker is
less than 50 W to prevent damaging the speakers.) /
High Power : Vol 0 – Vol 50 / Off : Deactivates the built-in amplifier.
Selectable setting, [ Initial: Underlined ]
/ ¢
to adjust the left

Advertisement

Table of Contents
loading

Table of Contents