Panasonic TH-98LQ70U Operating Instructions Manual page 69

[OPTION CONTROL] screen
Click [OPTION CONTROL] from the menu. Command
input field for command control of the unit is displayed.
COMMAND Enter a command. Use the
same command used for the
serial control. (see page 21)
RESPONSE Response from the unit is
displayed.
SEND Command is sent and run.
Note
●
After the settings are changed, it may take a while
until the Display's response is displayed.
[NETWORK SETTING] screen
Click [NETWORK SETTING from the menu. Various
settings of a network can be set. For details of the
setting items, please check [LAN setup] in [Network
settings] of the unit. (see page 52)
DHCP Set to [ON] when a DHCP
server is used, or [OFF] when it
is not used.
IP ADDRESS Enter an IP address.
SUBNET MASK Enter a subnet mask.
GATEWAY Enter a gateway address.
PORT Enter the port number used for
command control. The available
setting range is 1024 - 65535.
DUPLEX Set the connection speed of the
LAN environment.
NETWORK ID Set the ID to identify this unit.
The available setting range is
0 - 99.
SAVE Save the each set value.
Note
●
To use a DHCP server, make sure the DHCP
server is started.
●
While a DHCP server is used, [IP ADDRESS],
[SUBNET MASK], and [GATEWAY] values cannot
be entered.
●
When the set values are changed successfully,
[NETWORK SETTING CHANGED.] message and
the changed set items are displayed.
[CHANGE PASSWORD] screen
Click [CHANGE PASSWORD] from the menu. Password
to access the Web Browser Control can be set. When
the password is changed in this screen, the password
used for command control and the PJLink security
authentication is also changed.
OLD Enter the old password.
PASSWORD
NEW Enter the new password.
PASSWORD
NEW Enter the password entered
PASSWORD in [NEW PASSWORD] for
(RETYPE) confirmation.
SAVE Save the new password.
The confirmation screen is
displayed. Click [OK] to change
the password.
Note
● The default password is [panasonic].
●
Up to 32 alphanumeric characters can be used for
a password.
●
When the password is changed properly,
[Password has changed.] message is displayed.
69
English