■
When the Unit is turned on for the first time
Following screen will be displayed.
Set with the remote control. Unit buttons are invalid.
1
Select the language with
press <ENTER>.
OSD Language
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
2
Select [Day] or [Time] with
set with
Day/Time settings
Set
Day
Time
3
Select [Set] with
<ENTER>.
Day/Time settings
Set
Day
Time
4
For vertical installation, select
[Portrait] with
<ENTER>.
Display orientation
Landscape
5
Select [On] or [Off] with
<ENTER>.
High altitude mode
Switch to high altitude mode "On" if over
1400m(4593Ft).
On
26
English
.
Time
MONDAY 99:99
TUESDAY
18:00
and press
Time
TUESDAY 18:00
TUESDAY
18:00
and press
Portrait
and press
Off
Note
●
Once the items are set, the screens won't be
displayed when switching on the unit next time.
After the setting, the items can be changed in the
and
following menus.
[OSD language] (see page 52)
[Day/Time settings] (see page 50)
[Display orientation] (see page 51)
[High altitude mode] (see page 51)
■
Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
and
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON. (see page 51)
"Power management" Information
Last turn off due to 'Power management'.
When "Power management" is functioned, an
information message is displayed every time the power
is turned ON. (see page 46)
These message displays can be set with the following
menu:
●
[Options] menu
Power on message(No activity power off)
(see page 61)
Power on message(Power management)
(see page 62)
'No activity power off' is enabled.