Panasonic TH-98LQ70U Operating Instructions Manual page 37

[Colour Adjusts colour tone.
temperature]
[3000K] - [11500K], [USER1],
[USER2], [USER3]
Note
●
Emphasizes red when the
numerical value of [Colour
temperature] is small, and
emphasizes blue when it is big.
You can select [USER1] -
[USER3] when you set the
following user settings.
User setting of [Colour
temperature]
3 kinds of detailed [Colour
temperature] settings can be
stored.
1 Press <ENTER> while setting
[Colour temperature].
Sharpness
Gamma
Colour temperature
Example: When [Colour
2 Select the user to memorise
settings with
<ENTER>.
Adjust colour temperature
Change to 6500K
3 Select [Ok] with
<ENTER>.
Adjust colour temperature
Overwrite colour temperature "USER1"?
4 Set each item on detail settings
screen.
Adjust colour temperature
USER1
R gain
G gain
B gain
R bias
G bias
B bias
0
2.2
6500K
temperature] is
[6500K], it is possible
to reflect the set point,
[6500K], to the set
point of [USER1] to
[USER3].
and press
USER1
USER2
USER3
and press
Ok Cancel
[R gain]
Adjusts the white balance for light
red areas.
0 (colour temperature high) to
255 (colour temperature low)
[G gain]
Adjusts the white balance for light
green areas.
0 to 255
[B gain]
Adjusts the white balance for light
blue areas.
0 (colour temperature low) to 255
(colour temperature high)
[R bias]
Adjusts the white balance for dark
red areas.
-120 (colour temperature high) to
+120 (colour temperature low)
[G bias]
Adjusts the white balance for dark
green areas.
-120 to +120
[B bias]
Adjusts the white balance for dark
blue areas.
-120 (colour temperature low) to
+120 (colour temperature high)
The settings are memorised
separately for each input terminal.
When you return to [Picture]
menu, the user you have set is
selected for [Colour temperature].
Sharpness
Gamma
Colour temperature
[FRAME Improves motion picture quality.
CREATION]
Select [Off] when the motion
picture looks unnatural.
Note
●
The mode is memorised per
input terminal.
During 4 Input multi display,
all the 4 screens are switched
to On / Off. The mode is also
memorised separately from that
of 1-screen display.
●
Even when [Default] is
selected, the Normal setting will
not be restored.
●
The picture and the menu will
disappear for a moment after
you changed settings.
5
2.2
USER1
37
English