Audio Setup; Sound Field Control - Kenwood KDC-W8534 Instruction Manual

General features

Audio Setup

Setting the Sound system, such as Volume offset
and Dual Zone.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Setup the Audio item
Turn the [VOL] knob.
Adjustment Item Display
Volume offset "Vol-Offset"
Dual Zone System "2 ZONE"
• Volume offset: Sets each source's volume as a
difference from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 40).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
- Adjust the volume of Rear channel by <Audio
Control> (page 11).
- The Audio Control has no effect on sub source.
• You can use the Dual Zone System with the Auxiliary
input sources listed below.
- Internal auxiliary input
• You can use the Dual Zone System only when you
have set the rear speaker to any mode other than
"None" in the <Sound Management system> (page
14).
• When the "2 ZONE" is ON, ignore the following setups.
- <Sound Field Control> (page 12)
- <Sound Management system> (page 14)
- <Equalizer Control> (page 15)
- <WOW Control> (page 16)
- <Bypass Control> (page 16)
• ODD D/A System is not effective when the "2 ZONE" is
ON.
5
Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
12
|
English
Range
–8 — ±0
OFF/ON

Sound Field Control

1
Select the source to adjust
Press the [SRC] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.F.C" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3
Enter Sound Field Control mode
Press the [1] ("S.F.C") button.
• When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "S.F.C".
4
Select the Sound Field Control item to
adjust
Press a [1] — [3] and [5] button.
Each time you press the [1] — [3] and [5] button,
the adjustable audio item alternates between
the ranges of all stage section's tables on the
following pages.
Multi-function key operation
[1] "XOver" "HPF-F Fc"*
"HPF-R Fc"*
"LPF-SW Fc"*
[2] "DTA" "DTA-F SP"
"DTA-R SP"
"DTA-SW"
[3] "POSI" "Position"
[5] "Preset" [1] "RCL"
[2] "MEM"
• * The following adjustment items can be selected by
[FM] or [AM] knob for "XOver".
[1] "XOver"
[FM] or [AM] Knob
"HPF-F Fc" Front High Pass Filter Center
"HPF-F Slope"
Front High Pass Filter Slope
Rear High Pass Filter Center
"HPF-R Fc"
"HPF-R Slope" Rear High Pass Filter Slope
"LPF-SW Fc"
Subwoofer Low Pass Filter Center
"LPF-SW Slope"
Subwoofer Low Pass Filter Slope
"SW Phase"
Subwoofer Low Pass Filter Phase
Sound Field control item
Front High Pass Filter
Rear High Pass Filter
Subwoofer Low Pass Filter
DTA Front
DTA Rear
DTA Subwoofer
Position Setting
Recall mode
Memory mode