Entering Prefix Codes - Siemens Gigaset 3035 Operating Instructions Manual

26.6.00 anhang.fm
Appendix
Press the keys in the
specified order
SC 1..3 (MSC)
131
Gigaset3035a

Entering prefix codes

If you are using your base station telephone on a telepho-
ne system, then you have to dial a prefix code (access
code SC) to access the public telephone network. The
operating instructions for the telephone system will ex-
plain the prefix codes.
The following inputs are required if the telephone system
is connected as a satellite system to a main telephone sy-
stem:
the prefix code,
the main prefix code.
You can enter up to four prefix codes (3 access codes and
1 main MSC code). The prefix code entered as access
code 1 or MSC is automatically inserted in front of a call
number, for example when a number is transferred to the
calls list. This enables you to dial the call numbers directly
from the calls list or directory.
Call the menu.
Select and confirm.
Select and confirm the required memory.
Enter the prefix code (see also back cover).
Open the supplementary menu.
Save the entry.
and The phone is in standby.
When making new entries in the telephone
directory and with call restriction, emergency num-
bers and hot key selection you must save the prefix
manually before each call number.
A31008-G3035-B001-3- Correction: 0