Connecting The Base Station Telephone - Siemens Gigaset 3035 Operating Instructions Manual

26.6.00 betrieb.fm
Getting started

Connecting the base station telephone

Please follow the sequence specified
1. Insert the connector at the long end of the coiled handset cord into the
socket marked
into the cable guide.
2. Attach the other end to the handset.
3. Insert the phone cable into the socket marked
telephone and push it into the cable guide.
4. Connect the other end to the telephone wall socket.
5. Insert the connector of the mains cable into the
station telephone and push it into the cable guide.
6. Connect the plug-in power supply unit to a 220V/230V mains socket.
Make sure that the handset is on-hook prior to this.
After this, carry out the basic settings with the help of the installation as-
sistant.
Use only the plug-in power supply unit supplied, as indicated on the
underside of the device.
Power failure:
Your phone and the registered handsets will not function in the event
of a power failure. All settings and stored information (messages, tele-
phone directory entries) except the date and time will be preserved for
an unlimited period.
14
Gigaset3035a A31008-G3035-B001-3-
on the base station telephone. Push the handset cord
Correction: 0
on the base station
socket on the base