Battery Replacement - Omron HJ-720IT Instruction Manual

5.
Tighten the screw on the battery cover.
NOTES:
• The time setting display will appear on the
screen for approximately 5 minutes after the
battery is inserted.
• After installing the battery, set time of day,
weight and stride length. (Refer to "Setting the
Time" on page 11)
When the battery is removed from the unit, the time of day and the data stored in
the memory for the current hour will be deleted. The weight, stride length setting
and the data stored in the memory up to the previous hour will not be deleted.
The current day is automatically stored in the memory when the time reaches
12:00AM. Do not replace the battery at 12:00AM. For example: If you remove
the battery at 11:59PM and replace the battery at 12:01AM the data for the
previous day will be stored as the current day.
When the Battery Indicator appears on the display screen remove the old battery.
NOTE: When the battery indicator starts to blink, the unit stops counting, and the
time is displayed as "--:--".
Take the battery out with a thin stick that is not
easily breakable.
• DO NOT use a pair of metal tweezers or a screwdriver.
• Replace with a new CR2032 battery.
• Dispose of battery according to applicable local regulations.
BATTERY INSTALLATION

BATTERY REPLACEMENT

Low Battery Indicator
10