Auto Memory Entry; Preset Tuning - Kenwood KDC-7024 Instruction Manual

The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [1] —
[6] button.

Auto Memory Entry

Putting a station with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "Auto-Memory" display.
4
Open Auto Memory Entry
Press the [4] or [¢] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
• When the <AF (Alternative Frequency)> (page 40) is ON, only RDS
stations are put in the memory.
• When Auto Memory Entry is done in the FM2 band, the RDS
stations preset in the FM1 band aren't put in the memory.
Likewise, when it is done in the FM3 band, RDS stations preset in
FM1 or FM2 aren't put in the memory.

Preset Tuning

Calling up the stations in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function item is not
displayed above the [2] — [5] button.
Refer to <Notes on Multi-function Key System> (page 8).
3
Call up the station
Press the desired [1] — [6] button.
— 21 —