Tuner Features; Tuning; Station Preset Memory - Kenwood KDC-7024 Instruction Manual

Tuner features

MENU SRC
Band display
ST indicator
1-6 NEXT
RTN NEXT
NAME.S NF DAB
4 ¢
FM
AM
Frequency display
Preset station number

Tuning

Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3
Tune up or down band
Press the [4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.

Station Preset Memory

Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Select the key function section
Press the [NEXT] button.
Repeatedly press the button until the function item is not
displayed above the [2] — [5] button.
Refer to <Notes on Multi-function Key System> (page 8).
4
Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds.
— 20 —