5.4 Hard Drive
120-GB
100-GB
80-GB
Hard Drive Bracket Kit
1. Prepare the computer for disassembly (refer to
2. Loosen the two captive Phillips PM2.0×5.0 screws 1 that
secure each hard drive cover to the computer.
3. Lift the right side of the cover 2 and swing it to the left.
4. Remove the hard drive cover.
✎
The hard drive covers are included in the Plastics Kit,
spare part number 432981-001.
Removing the Hard Drive Covers
Maintenance and Service Guide
Hard Drive Spare Part Number Information
Removal and Replacement Procedures
432998-001
432997-001
432996-001
434106-004
Section
5.3).
5–7