Exiting The Maintenance Mode; Setting The Factory Default Data - Kyocera FS-6525MFP Service Manual

Item No.

Exiting the maintenance mode

U001
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
Press the start key. The normal copy mode is entered.
U002

Setting the factory default data

Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport
Method
1. Press the start key.
2. Select [Mode1(All)].
3. Press the start key.
The mirror frame of the scanner returns to the position for transport.
4. Turn the main power switch off and on.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U002.
Error codes
Codes
0001 Entity error
0002 Controller error
0020 Engine error
0040 Scanner error
Description
Description
1-3-14
2MW/2MX