Adjusting The Leading Edge Registration For Memory Image Printing - Kyocera FS-6525MFP Service Manual

Item No.
U407

Adjusting the leading edge registration for memory image printing

Description
Adjusts the leading edge registration during memory copying.
Purpose
Make the following adjustment if there is a regular error between the leading edge of the copy
image on the front face and that on the reverse face during duplex switchback copying.
Caution
Before making this adjustment, ensure that the following adjustments have been made in mainte-
nance mode
U034
( P.1-3-20)
U404
( P.1-3-62)
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select [Adj Data].
Display
Adj Data
6. Change the setting value using the cursor left/right keys or numeric keys.
For copy example 1, decrease the value. For copy example 2, increase the value.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
U402 U066
( P.1-3-60) ( P.1-3-29)
U407
Description
Leading edge registration for
memory image printing
Original
Figure 1-3-17
1-3-63
U403
( P.1-3-61)
Setting
range
-47 to 47
Copy Copy
example 1 example 2
2MW/2MX
U071
( P.1-3-34)
Initial Change in
setting value per step
0 0.1 mm