(3) Detaching and refitting the inner tray
Procedure
1. Release the lock lever and then remove
the job separator tray.
2. Remove the cassette.
(See page 1-5-10)
3. Open the front cover.(See page 1-5-3)
4. Remove two screws.
5. Release three hooks A.
6. Pull the left lower cover upwards and
then release nine hooks B.
7. Remove the left lower cover.
Left lower cover
Hook B
Screw
Hooks B
Screw
1-5-6
Lock lever
Job separator tray
Figure 1-5-7
Hooks B
Hooks A
Figure 1-5-8
2MW/2MX