Setup A: Home Theater Receiver And Tv With Composite Video Connection - Pace TDC577X Operator's Manual

CONNECTING THE EQUIPMENT (cont.)
Set-up A: home theater receiver and tv with composite
video connection
The set-up shown on page 13 uses a composite video connection to connect to the TV.
Variations
If your TV has component (YPbPr) video connectors, you will see a better quality picture if you use
the set-top's YPbPr video output jacks instead of the composite (VIDEO OUT) jack.
Alternatively, if your TV does not have component video connectors, but does have an S-video
connector, use the set-top's S-video output jack instead of the composite (VIDEO OUT) jack. This will
also give a better quality picture.
How you set up your equipment may depend on your home theater receiver. For example, the optical
and digital audio inputs may be associated with particular video inputs. Please see your home theater user
information for further details.

NOTE