Your Digital Tv Recorder - Pace Twin Manual

YOUR DIGITAL TV RECORDER

This User Guide contains all you need to
know about how to watch and record
digital terrestrial TV using your Pace
Digital TV Recorder.
It's easy to install; just follow the
instructions in the following sections,
Viewing card slot –
insert your viewing
card here when you
are requested to do so
(for future use only)
Record indicator –
lights when recording
a programme to the
hard disk
Clock/channel number display –
shows the current time when switched off
(in standby mode), and the current channel
number when switched on. Also displays
playback time elapsed and other status
information.
Before you start installing your TV
Recorder, please check you have the
following items:
• Your TV Recorder;
• A SCART lead;
• An RF lead;
• A mains lead;
• Your remote control;
• Two 'AAA' batteries for the remote
control.
Play indicator – Remote command
lights when playing indicator – lights when
back a recording your TV Recorder
from the hard disk receives a signal from
the remote control
Record button –
record the
currently-showing
or selected
programme
which guide you through connecting and
setting it up.
See also page 8, page 9 and page 10,
which describe your TV Recorder's
remote control.
Arrow buttons – to move the
selection, change channel
lists, choose settings etc.
TV1/TV2 button –
to view the current output
from the TV2/VCR SCART
on a TV connected to the TV
SCART (see page 12 for
further details)
Standby button –
to switch your TV
Recorder on and off
OK button –
choose current
selection, confirm
settings etc.
Menu button –
display the Main
menu screen
5
4