Using The Setup Menus - Pace TDC575D Operator's Manual

The Setup menus allow you to make settings to control how your set-top works. These are available
from your TV Guide and should be fully described in the information provided by your service
provider. There may also be on-screen information to explain these menus.
However, please note there are certain items and settings that may affect how your set-top and TV
work. See the table below for information about these.
Item Setting
Cable Box AC Outlet
Setup
RF Bypass
Configuration
Audio Default Audio
Track
Audio
Output
Screen position
Other items and options may be available on these screens. The menus may be subject to change in the future, as
your set-top advances with new technology.
Options Notes
Switched, If setting is "Switched", the AC outlet on your set-top's rear panel is on when your set-top
Unswitched is on, and off when your set-top is off, so any TV that is therefore receiving its power from
this AC outlet will switch off when your set-top is turned off. If setting is "Unswitched",
the AC outlet is always on, so any TV that is receiving its power from this AC outlet will
continue to receive power whether your set-top is switched on or off.
Off, On You must set this to "On" in order to use RF Bypass.
For information about RF Bypass, see page 17.
Allows you to view the configuration of your set-top.
Channel Default, Set the language track that your set-top first attempts to use when tuning to a channel.
English, Espagñol, "Channel Default" means your set-top will use the default audio track for the program.
Français, Português Selecting a language means it will use the corresponding language track, if available.
TV Speakers, If you select "Advanced", further settings are displayed, allowing you to set the Compression
Stereo, Advanced (to None, Light or Heavy) and the Stereo Output (to Mono, Stereo or Matrix Stereo).
This allows you to adjust how the picture displays in the TV screen.

USING THE SETUP MENUS