Power Cord; Oven Door Removal; Frameless Door Disassembly - Maytag AGS1740BD series Service

Disassembly Procedures

Power Cord

NOTE: Requires removal of range from installation
position.
1. Turn off electrical power and gas to the range.
2. Remove range back panel, see "Back Panel"
procedure.
3. Disconnect power cord terminals from range
electrical connectors.
4. Remove screw securing cord to unit.
5. Replace and reassemble in reverse order.

Oven Door Removal

!
WARNING
To avoid risk of personal injury or property damage,
do not lift oven door by the handle.
1. Open oven door and grasp door on both sides.
2. Lift up and off the hinge receivers.
3. Reverse procedure to reinstall oven door.
©2005 Maytag Services
To avoid risk of electrical shock, personal injury or
death; disconnect power and gas before servicing.

Frameless Door Disassembly

1. Remove oven door, see "Oven Door Removal"
procedure.
2. Place door on a protected surface.
3. Remove screws securing bottom trim to oven door.
4. Slide outer oven door glass and trim towards the
bottom of the oven door and remove.
5. Detach right and left trim pieces for outer door glass.
NOTE: Proceed with the following steps for door hinge,
door handle, and inner door disassembly.
6. Remove screws securing door hinge to oven door
chassis.
NOTE: Proceed with the following steps for door handle
and inner door disassembly.
7. Remove screws securing top door handle trim to
oven door chassis.
8. Remove screws securing door handle brackets to
inner door panel.
9. Lift upward on the lower side of the door handle to
release side alignment screws and rotate towards the
top of the oven door to release and remove.
10. Remove screws securing door handle to door handle
brackets.
NOTE: Proceed with the following steps for inner door
disassembly.
11. Remove screws securing lower door glass retainer to
door baffle and remove.
12. Slide inner door glass downward to release from
upper door glass retainers and remove.
13. Remove screws securing door baffle to door lining
and remove.
14. Remove insulation from oven door.
15. Lift inner glass and glass frame from oven door.
16. Reverse procedure to reassemble oven door.
16026293 31