Switching Full-Screen Display - Kenwood Z920DVD Instruction Manual

NOTE
• You can give names to discs through the presetting disc
name function (page 50).
Note that depending on the unit, display may not be
possible.
• If you try to display the name of a disc that does not have
one, "NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for
which the disc title/track title has not been recorded, "NO
TEXT" is displayed for CD and "NO TITLE" is displayed for
MD.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
In AUX mode:
Spectrum Analyzer + Clock
Date + Function indicator
Spectrum Analyzer
3
Press the S.A button to end the display control mode.
NOTE
• For display mode selection, see "Switching display mode" (page
12).
• If the display mode is set to "Display Type B", you can turn on or
turn off the clock.
• The same items cannot be selected for both the upper part and
the lower part.

Switching Full-Screen Display

This function switches the type of information on the display
when the display mode is "Display Type C".
Each time you press the S.A button, the full screen display
changes as follows:
Demonstration
Spectrum Analyzer 1 + Icon/Spectrum analyzer
Spectrum Analyzer 2 + Icon/Spectrum analyzer
Spectrum Analyzer 3 + Icon/Spectrum analyzer
Spectrum Analyzer 4 + Icon/Spectrum analyzer
Graphic 1
Graphic 2
NOTE
• For display mode selection, see "Switching display mode" (page
12).
• You can switch the Icon/Spectrum analyzer.
See "Icon/Spectrum analyzer Select" in the menu setting (page
57).
— 15 —