Speaker Setting; Switching Full Screen Display; Switching The Standby Display - Kenwood KDC-8021 Instruction Manual

Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [Q] button.

Switching Full Screen Display

Switching the Full screen display.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
3
Enter Display Control mode
Press the [4] or [¢] button for at least 1 second.
4
Switch the Full screen display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Graphic 1 (KDC-PSW9521)
Spectrum Analyzer 4 (KDC-M907/ M9021/ 8021)
Graphic 2 (KDC-PSW9521)
Spectrum Analyzer 5 (KDC-M907/ M9021/ 8021)
Display
"OFF"
"5/4inch"
"6 9/6 inch"
*
"O.E.M."
— 13 —
5
Exit Display Control mode
Press the [MENU] button.
Full Screen display can be selected when "Display Type C" is
selected in <Switching Display Type> (page 32).

Switching the Standby Display

Switching the information displayed in Standby.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Display Control mode
Press the [FM] or [AM] button.
Select the "Display Mode Select"/"Disp Mode Select" display.
4
Enter Display Control mode
Press the [4] or [¢] button for at least 1 second.
5
Switch the display
Press the [4] or [¢] button.
Each time the button is pressed the display switches.
Information
Demonstration
Date & Clock
Standby display
6
Exit Display Control mode
Press the [MENU] button.
Demonstration can be selected when "Display Type A" or "Display
Type C" is selected in <Switching Display Type> (page 32).
Display
"DEMONSTRATION"
"DATE"/"CLOCK"
"ALL OFF"