Middle Centre Frequency; Middle Level; Middle Quality Factor; Treble Centre Frequency - Kenwood Z920DVD Instruction Manual

Audio effect control features
<When the KDS-P901 is not connected>

5.Middle Centre Frequency

Adjust the centre frequency of the middle.
Display and setting:
"MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz.

6.Middle Level

Adjust the middle level.
Display and setting:
"MID" : - 9 – 0 – + 9

7.Middle Quality Factor

Adjust the middle quality factor.
Display and setting:
"MID Q" : 1.00 / 2.00

8.Treble Centre Frequency

Adjust the centre frequency of the treble.
Display and setting:
"TRE FRQ" : 10.0 / 12.5 / 15.0 / 17.5 kHz

9.Treble Level

Adjust the treble level.
Display and setting:
"TRE" : - 9 – 0 – + 9

10.Balance Level

Adjust the balance level.
Display and setting:
"Balance" : Left 15 – 0 – Right 15

11.Fader Level

Adjust the fader level.
Display and setting:
"Fader" : Rear 15 – 0 – Front 15

12.Non-Fading Level

Adjust the Non-fading output level.
Display and setting:
"NF Level" : - 15 – 0 – + 15
NOTE
This mode is available only when the non-fading output function
is set to on.
— 20 —