Table of Contents
Advertisement
Display Mode Switching
Switching the display mode.
Press the [DISP] button.
Each time the button is pressed the Display mode switches as
shown below.
Display mode
Upper and lower division display type
Type that mainly uses the display upper part "Display Type B"
Full screen display type
• The display of each part can be changed.
- Switching Upper and Lower Part Display: (page 10)
- Switching Full Screen Display: (page 9)
• "Display Type C" can't be selected in "ALL OFF".
Switching Full Screen Display
Switching the Full screen display.
Press the [S.A] button.
Each time the button is pressed the display switches as shown
below.
Information
Demonstration
Spectrum Analyzer 1
Spectrum Analyzer 2
Spectrum Analyzer 3
Spectrum Analyzer 4
Spectrum Analyzer 5
Full Screen display can be selected when "Display Type C" is
selected in <Display Mode Switching> (page 9).
Switching the Standby Display
Switching the information displayed in Standby.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
Display
2
Switch the display
"Display Type A"
Press the [S.A] button.
Each time the button is pressed the display switches as shown
"Display Type C"
below.
Information
Demonstration
Date & Clock
Standby display
— 9 —
• Demonstration can be selected when "Display Type A" is selected
in <Display Mode Switching> (page 9).
• Only "Display Type A" and "Display Type B" can be selected in "ALL
OFF".
Display
"ALL OFF"
Advertisement
Table of Contents
