Icon/Spectrum Analyzer Select; Font Select; Dimmer; Loudness - Kenwood Z920DVD Instruction Manual

Icon/Spectrum analyzer Select

This function permits switching of the spectrum analyzer
display.
Display and setting:
1
Select the display "Icon/Speana Select" during the selecting
function in the menu system.
Pressing the 4 or ¢ button switches the Icon/Spectrum
2
analyzer.
NOTE
You cannot operate when the display mode is set to "Display Type
B" .

Font Select

You can change the font used on the display.
Display and setting:
1
Select the display "Font Select" during the selecting function in
the menu system.
Pressing the 4 or ¢ button switches the font on the
2
display.

Dimmer

You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.

Loudness

<When the 5.1 ch surround processor unit is not connected>
This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Display and setting:
"Loudness ON" : The loudness function is on. (Default setting)
"Loudness OFF" : The loudnesss function is off.
— 57 —