Remote Battery Installation; Optional Connection; Line In Jack (Rear Of Unit) - Memorex Mi4390 User Manual

Dual alarm clock radio
Table of Contents

Advertisement

POWER SOURCE (CONTINUED)

REMOTE BATTERY INSTALLATION

Follow these precautions when using batteries in this device:
1.
Warning–Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
2.
Use only the size and type of batteries specified.
3.
Be sure to follow the correct polarity when installing the batteries as indicated
in the Battery Compartment. A reversed battery may cause damage to
the device.
4.
Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon-zinc) or old batteries with fresh ones.
5.
If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
6.
Do not try to recharge a battery not intended to be recharged; it can overheat and
rupture. (Follow battery manufacturer's directions.)

LINE IN JACK (REAR OF UNIT)

Insert one end of the audio cable (not included) into the LINE OUT jack on
your external audio unit and the other end into the LINE IN jack on the rear of
this unit.
To listen to the external audio unit, turn this unit on using the Power button,
and turn on the external unit as well. Repeatedly press the MODE button to
select LINE IN mode; "LINE IN" will appear in the display. The external audio
unit's output sound will be heard through this unit's speakers. If you wish to
listen to the iPod in the iPod compartment, repeatedly press the MODE button
to select iPod mode; iPod will appear in the display.
NOTE: If this unit is turned on and in FM/iPod mode, once the external unit is
connected, this unit will change to LINE IN mode automatically. Then, if you
disconnect the external unit from the LINE IN jack, this unit will revert back to
FM/iPod mode.
1.
2.
3.
BATTERY PRECAUTIONS

OPTIONAL CONNECTION

Remove the Battery Compartment by
pressing in on the tab and then sliding the
compartment out.
Install a CR2025 battery by popping it
in through the back of the compartment,
paying attention to the polarity diagram in
the compartment (positive side up).
Replace the Battery Compartment.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents