USING THE FM RADIO
1
Turn this unit on by pressing the
Power button.
3
1
Repeatedly press the Tune/ Skip/
Search Down o 1 or Up n 2
button to manually advance the
frequency in the display up or down
until the desired frequency appears.
For auto tuning, press and hold the
Tune/Skip/Search Down o 1 or
Up n 2 button until the frequency
in the display starts to scan and
then release; the tuner will search
and then stop on the next strong
station it finds. Repeat this step until
the desired frequency appears in
the display.
Antenna:
Connect the FM wire to the FM antenna jack, unravel and extend the FM
wire antenna for best reception.
OPERATION (CONTINUED)
2
2
Repeatedly press the MODE button
to select the FM Radio mode;
"RADIO" will appear in the display.
NOTES:
•
When a station is tuned,
after three seconds, the radio
frequency will disappear and
the actual time will reappear in
the display.
•
See the previous page for how
to adjust the volume.
•
To turn this unit off, press the
Power button.
•
If a strong stereo signal is
broadcast, the Stereo (ST)
indicator will light.
11