Memorex MCB328 Manual

Clock Radio with NFC

MCB328 v2185-01

Features

• NFC & Bluetooth wireless -
• Built-in FM radio with up to 20
range: 60 ft. radio presets
• Built-in speaker • Digital clock
• Microphone for hands free • 1.8˝ Blue LED display
speakerphone operation
• Aux In (3.5mm audio input)
Daylight Savings Time
Press and hold to move the
time 1 hour ahead or behind.
AL1/AL2
Press to set alarm times.
Microphone
Power/Source
Press and hold to power audio
features ON or OFF.
Press to change audio mode.
Volume Up/Down
Daylight Savings Time Indicator
PM Indicator
Alarm On/Off Indicator
Aux In (3.5mm audio input)
DC Power Port
Backup Battery
Compartment
(requires CR2032 battery)
Includes
• 5V 2A USB power port for mobile
device fast charging
• Battery backup - requires CR2032
button cell battery
NFC Connection Area
Time Zone
Press and hold to begin setting Time
Zone. Press to cycle through different
zones (see Time Zone instructions).
Snooze/Sleep/Dimmer
Press and hold to dim the display.
Press to set the sleep timer.
Press to Snooze alarm after it has sounded.
Clock Power & Mobile Device Charging
Plug the AC/DC power adapter into a standard power outlet and
the DC power input on the rear of the clock to power it on.
Mobile devices can be
charged by connecting them
to the USB charging port on
the rear of the clock. Power
output is 5V 2A.
• AC/DC power adapter
• Warranty
Clock/Preset
Press and hold to set the clock.
Press to cycle through radio presets
Clock
When the clock is plugged in, the correct time will be displayed after a few
Play/Pause/Pair
seconds.
Bluetooth
Setting the Clock Manually
Press and hold to begin
pairing to a Bluetooth device
1. Press and hold the Clock button. The display will begin flashing.
(Bluetooth Mode).
2. Use the Hour/Minute buttons to set the time. Note the PM indicator.
Press to play or pause audio
(Bluetooth Mode).
Daylight Savings Time
Press and hold the DST button to adjust the time one hour ahead or behind for
Skip Track/Hour/Minute
Daylight Savings Time.
Press to Skip audio tracks
(Bluetooth Mode).
Time Zone
Pres to adjust the time when
Press and hold the Time Zone button to begin setting the desired time zone.
setting the clock.
The display will begin flashing, press the Time Zone button repeatedly select
the appropriate zone.
1 Atlantic Time
2 Eastern Time
3 Central Time
Low Battery Indicator
4 Mountain Time
(Battery Backup)
Setting an Alarm
1. With the radio off, press and hold the AL1 or AL2 buttons to set the time
Source Mode Indicators
for Alarm 1 or Alarm 2. The display will flash and show the time the alarm
FM / Bluetooth / Aux In
is set to go off. Press the Hour/Min buttons to adjust the time. Note the
PM indicator.
2. Press the AL1/AL2 buttons again to set a weekly alarm schedule.
1-7 rings Mon-Sun | 1-5 rings Mon-Fri | 6-7 rings Sat-Sun
3. After the alarm is set and the display has stopped flashing, press the AL1/
AL2 buttons again to select the alarm type (Buzzer or Radio). Press once
more to deactivate the alarm entirely. Note the Alarm ON/OFF indicators.
Alarm Details
• To cancel the alarm after it has sounded, press the AL button of the
alarm that is sounding.
USB Charging Port • To delete the alarm, press the AL button of the alarm you wish to cancel
until the indicator on the display turns OFF.
Sleep Timer
Speaker
• Press the Snooze button once to set the Sleep Timer. Press again to adjust
the time in 10 minute intervals from 90 to 0 (OFF).

Bluetooth Wireless

Pairing to a Bluetooth Device and Playing Audio
1. Press and hold the
indicating that the unit is in Bluetooth Mode and connecting. When pairing,
remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select MCB328 from your
Bluetooth settings to pair. When successfully paired, the voice will
announce the successful connection. Refer to the user's manual for your
specific device for more detailed instructions on pairing and connecting
Bluetooth devices.
3. Audio played through the connected Bluetooth device should now be
heard through the speaker. Use the controls on the connected Bluetooth
device to select and begin playing audio. Play, pause or skip audio using
the controls on the device or the unit.
Speakerphone
• To accept or end a phone call coming through the connected Bluetooth
phone, press the
• To decline a call, press the
Previously Connected Devices
• This unit can remember multiple Bluetooth devices and will always try to
reconnect to the last device used.
• To reconnect to a different device, turn off Bluetooth on unwanted devices,
then access the Bluetooth settings menu on the device you wish to use
and connect to MCB328.
• If the unit should become unpaired or will not connect normally, delete the
unit for your device's Bluetooth settings menu ("Forget This Device"), turn
the unit off and on again, and perform the Bluetooth connection again.
NFC Connections
Note: Refer to your specific device's manual for general information, and
instructions on how to check for NFC availability and turn the feature on.
1. Press the Source button to set the unit to Bluetooth mode.
2. After activating your mobile device's NFC, lightly touch your device to the
NFC logo on the unit and hold it there for several seconds. The unit will
connect to your mobile device automatically.
3. When successfully paired and connected, the Bluetooth Indicator on the
display will turn solid .
4. After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
UTC-4 hrs 5 Pacific Time UTC-8 hrs
FM Radio
UTC-5 hrs 6 Alaska Time UTC-9 hrs
UTC-6 hrs 7 Hawaii - Aleutian Time UTC-10 hrs
Note: This unit has a built-in FM antenna. To improve radio reception, adjust the
position of the unit.
UTC-7 hrs
1. Press the Source button to switch to FM Mode. A voice prompt will sound
from the speaker and the display will show the radio frequency.
2. To automatically scan radio frequencies and set presets, press and hold
the
3. To manually set presets, press the Preset button to select a preset (1-20).
Tune the radio frequency with the Skip buttons, then press and hold the
Preset button to set it.
Aux In
Requires a 3.5mm audio cable (not included).
1. With the unit powered ON, connect a 3.5mm audio
cable to the Aux In port. Press the Source button to
switch to Aux-In Mode.
2. Use the controls on the connected device to play audio
through the unit.
button, a voice prompt will sound from the speaker
button on the speaker.
button twice.
button. When finished, press the Preset button to change presets.