Table of Contents
Advertisement
face detection
You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<event (
)> tab.
2. Click <event setup>.
3. Select <face detection> from < event
action setup> .
4. Set whether or not to <enable> .
5. Select <Sensitivity> tab to set the
sensitivity level.
As the sensitivity grows, face detection
`
becomes more close and detailed.
6. Select <area> tab and drag on the
screen to define the desired detection
area. You can specify up to 4 detection
areas.
If the face on the screen is rotated more
`
M
than +, - 45°, the motion detection may
not recognize it.
If the screen is in mirroring mode, the
`
motion detection cannot operate properly.
In such cases, turn off the <Filp mode>
or <Mirror mode> in <Video setup>.
7. To delete a defined area, click [clear] button while the Area tab is selected.
8. Set whether to use <Detection result overlay>.
When faces are detected, their positions and sizes are marked with rectangles on
the screen.
9. Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to "Alarm input". (page 61)
`
10. When done, click [apply (
)].
English _67
Advertisement
Table of Contents
