Table of Contents
Advertisement
setup screen
4. Select <area> tab.
You can specify an area on the screen
to include or exclude the area to/from
detection.
You can specify up to 4 areas.
• Detection area : Sets the entire
screen as excluded from detection,
and adds specified area as motion
detection area. Use your mouse to
drag to specify preferred area as the
motion detection area.
• Non detection area : Sets the entire
screen as motion detection area, and
excludes specified area as not to be
detected. Use your mouse to drag
to specify preferred area as the non
detection area.
5. To delete an area, right click on the
screen to open popup context menu
and select Delete, and [oK] button.
All areas defined are deleted.
`
J
6. When done, click [apply (
66_ setup screen
)].
Advertisement
Table of Contents
