Planet VIP-156 User Manual page 17

#124#
Check Gateway IP Address
#125#
Check Primary DNS Server Setting
#126# Check LAN IP Address
#128# Check Firmware Version
The following keypad commands can be used to set up the main function .
IVR Menu Choice
#138# Enable call waiting
#139#
Disable call waiting
#160# Update firmware
#510# Blind Transfer
#511#
Attendant Transfer
#512# 3-way calling
#514# IP transfer to PSTN
#130+[1~8]#
Set Codec
#131+[00~15]# Set Handset Gain
#132+[00~12]#
Set Handset Volume
#135xxx*xxx*xxx*
TFTP Server IP Address
xxx#
#136xxx*xxx*xxx*
FTP Server IP Address
xxx#
#137+[0~2]# Auto config mode
Machine operation
of the ATA.
IVR will announce the current gateway IP
address of the ATA.
IVR will announce the current setting in the
Primary DNS field.
IVR will announce the current LAN port IP
address of the ATA.
IVR will announce the version of the
firmware running on the ATA.
Parameter(s)
None
None
None
ATA Bland Transfer
ATA Attendant Transfer
ATA 3-way calling
ATA transfer IP call to
PSTN side
1:G.711 u-Law, 2: G.711
a-Law, 3: G.723.1, 4:
G.729a, 5: G.726 16K, 6:
G.726 24K, 7: G.726
32K, 8: G.726 40K,
Handset Gain from
0~15
Handset Volume from
0~12
Set Auto config TFTP
Server IP Address
Set Auto config FTP
Server IP Address
0: Disable, 1: TFTP
mode, 2: FTP mode
SIP Analog Telephone Adapter
Notes:
Enable Call waiting
Disable Call waiting
Update firmware
You can set the codec you
want to the first priority.
You can set the Handset
gain to proper value,
default is 10
You can set the Handset
volume to proper value,
default is 10
You can set the TFTP
Server IP address
You can set the FTP
Server IP address
You can set the Auto
configuration mode, 0:
Disable, 1: use TFTP
17