Planet VIP-156 User Manual page 16

IVR Menu Choice
#111#
Set DHCP client
#112xxx*xxx*xxx*
Setup Static IP Address
xxx#
#113xxx*xxx*xxx*
Set Network Mask
xxx#
#114xxx*xxx*xxx*
Set Gateway IP Address
xxx#
#115xxx*xxx*xxx*
Set Primary DNS Server
xxx#
#190#
Unlock
#191#
Lock
#195#
Reboot
#198#
Factory Reset
0＊
To switch PSTN mode
The following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice
#120#
Check PC IP Address
#121# Check network connection type
#122# Check the Phone Number
#123# Check Network Mask
Machine operation
Machine operation
Parameter(s)
None
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
Use the * (star) key
when entering a decimal
point.
None
None
None
None
None
IVR will announce the current PC-port IP
address of the ATA.
IVR will announce if DHCP is enabled or
disabled.
IVR will announce current enabled VoIP
number.
IVR will announce the current network mask
SIP Analog Telephone Adapter
Notes:
ATA will change to DHCP
Client
DHCP will be disabled and
system will change to the
Static IP type.
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
Must unlock the protect
function before setting up
network settings and ATA
function via keypad.
The system will be lock
and can't set up network
settings via keypad.
The system will reboot
automatically.
The system will be reset to
factory default value and
reboot automatically.
VIP-157 only
Notes:
16