Festool T 12+3 Original Operating Manual page 5

Original operating manual
1 Symbols ..................................
2 Machine features ......................
3 Intended use ...........................
4 Technical data ..........................
5 Safety instructions ....................
6 Operation ................................
7 Settings ..................................
8 Tool holder, attachments............
9 Working with the machine..........
10 Service and maintenance...........
11 Accessories..............................
12 Disposal ..................................
13 Transport.................................
14 Warranty .................................
15 EU Declaration of Conformity......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
4 Technical data
Cordless drill
Motor voltage
Idling speed*
Max. torque
Adjustable torque**
Chuck clamping range
Max. drill diameter in
Tool holder in drill spindle
Weight without battery, with Centrotec
13
13
13
13
14
15
16
16
16
17
17
17
17
18
18
1st gear
2nd gear
Soft material (wood)
Hard material (metal)
1./2. gear
wood
metal
T 12+3, T 15+3, T 18+3
Do not throw in the household waste.
2 Machine features
[1-1] Buttons for releasing the battery pack
[1-2] Bit store
[1-3] On/Off switch
[1-4] Right/left switch
[1-5] LED lamp
[1-6] Gear switch
[1-7] Drilling symbol
[1-8] Screwdriving symbol
[1-9] Drilling/Fastening selector switch
[1-10] Capacity display
[1-11] Belt clip*
[1-12] Torque thumbwheel
[2-1] Battery blanking plug
* not on all versions included in the scope of
delivery
3 Intended use
Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials
as well as inserting and tightening screws.
The charger TRC 3 is designed for charging
the battery packs listed.
The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and
wear caused during industrial continu-
ous operation.
T 12+3 T 15+3
10,8 - 12 V 14,4 - 15,6 V
0 - 450 rpm
0 - 1500 rpm
20 Nm
34 Nm
0,5 - 8 Nm
1,5 - 13 mm
25 mm 35 mm
14 mm 16 mm
0,95 kg 1,02 kg
T 18+3
18 V
27 Nm 30 Nm
40 Nm 45 Nm
45 mm
16 mm
1/4 ''
1,05 kg
GB
13