Model Tech P-47 Thunderbolt Instructions For Final Assembly page 7

Table of Contents

Advertisement

WING ASSEMBLY
(1) Plywood Dihedral Brace (W64)
(1) Plywood Wing Bolt Doubler (W72)
(2) 5mm x 35mm Machine Screws
(2) 5mm Flat Washers
(2) 5mm Blind Nuts
RETRACT LANDING GEAR ASSEMBLY
(2) Retract Assemblies with Prebent Struts
(2) 60mm Diameter Wheels
(2) Molded Plastic Wheel Cups
(4) Retract Cover-Plates (W70)
(2) 2mm x 250mm Pushrod Wires w/Z-Bends
(2) Adjustable Servo Connector Assemblies
(8) 3mm x 12mm Wood Screws
(2) 4mm Wheel Collars
(2) 4mm Nylon Spacers
(2) 3mm x 5mm Machine Screws
ELEVATOR CONTROL SYSTEM
(2) 755mm Nylon Pushrod Tubes
(2) 2mm x 255mm Threaded Wires
(2) Nylon Control Horns w/Backplates
(4) 2mm x 25mm Machine Screws
(1) 2mm x 20mm Machine Screw
(3) Nylon Clevises
(1) Nylon Pushrod Joiner Plate
(2) 2mm x 10mm Flange-Head Wood Screws
(2) 2mm Flat Washers
(1) 2mm Hex Nut
(6) C/A Style Hinges
THROTTLE CONTROL SYSTEM
(1) 2mm x 400mm Pushrod Wire w/Z-Bend
(1) Adjustable Servo Connector Assembly
IMPORTANT
Some of the parts listed in the Retract Landing Gear Assembly section are taken from the Fixed Landing Gear parts.
See other exciting Modeltech ARF airplanes at http://modeltech.globalhobby.com
FUEL TANK ASSEMBLY
(1) 360cc Fuel Tank
(1) 20mm Diameter Aluminum Front-Plate
(1) 18mm Diameter Aluminum Back-Plate
(1) Rubber Stopper
(1) Silicon Fuel Tubing
(1) Weighted Fuel Pick-Up
(2) Aluminum Tubes
(1) 3mm x 20mm Machine Screw
RUDDER & TAIL WHEEL CONTROL SYSTEM
(1) 755mm Nylon Pushrod Tube
(1) 590mm Nylon Pushrod Tube
(2) 2mm x 255mm Threaded Wires
(1) Nylon Control Horn w/Backplate
(2) 2mm x 30mm Machine Screws
(1) 2mm x 20mm Machine Screw
(3) Nylon Clevises
(1) Nylon Pushrod Joiner Plate
(2) 2mm x 10mm Flange-Head Wood Screws
(2) 2mm Flat Washers
(1) 2mm Hex Nut
(3) C/A Style Hinges
AILERON CONTROL SYSTEM
(2) Plywood Servo Covers (W59)
(4) Servo Mounting Blocks (W60)
(2) 2mm x 60mm Threaded Wires w/90º Bends
(2) Nylon Control Horns w/Backplates
(4) 2mm x 30mm Machine Screws
(2) Nylon Clevises
(2) Nylon Snap-Keepers
(8) 3mm x 5mm Wood Screws
(8) C/A Style Hinges
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents