Making The Connections; Power Line - AGFA QCR-Z Operator's Manual

Installation

POWER LINE

• Ensure that the POWER switch is in the OFF position. This switch is
located on the film recorder's front panel, and is off when the bottom half ('0')
is pressed in.
• Check the film recorder's a.c. line voltage requirements by inspecting
the serial number tag, located on its rear panel. They must exactly match
the line power that your wall outlet provides.
• Connect the molded end of the power cord (included in the
accessory kit) to the a.c. receptacle on the QCR-Z's rear panel. Connect
the three-prong end to a power line outlet sharing a common ground with
the unit or a wall outlet having a common ground.
If you are uncertain whether you have the correct power for the unit,
contact a licensed electrician or qualified service engineer. Never use a
3-to-2 prong a.c. adapter or otherwise defeat the ground prong on the
power cord provided with the unit.
QCR-Z Operator's Guide Version 4

MAKING THE CONNECTIONS

Check the serial number tag
and make sure the line voltage
requirements are met.
WARNING
3-2