Status And Error Indicators - AGFA QCR-Z Operator's Manual

STATUS AND ERROR INDICATORS

RECORD INDICATOR
RECORD
This indicator illuminates while the QCR-Z is recording an
image onto the film.
RED INDICATOR
RED
This indicator illuminates while the QCR-Z is recording red
image data onto the film. If there is a fault or error, a
combination of the RED, GREEN, and BLUE indicators may
be on, telling you what the problem is.
GREEN INDICATOR
GREEN
This indicator illuminates while the QCR-Z is recording
green image data onto the film.
BLUE INDICATOR
BLUE
This indicator illuminates while the QCR-Z is recording
blue image data onto the film.
MODULE INDICATOR
MODULE
This indicator illuminates if there is a fault with the camera
module that you are using on the QCR-Z.
FILM INDICATOR
FILM
This indicator illuminates when the 35mm module reaches
the end of film and the last frame is exposed.
FAULT INDICATOR
FAULT
This indicator illuminates if there is a hardware problem
with the QCR-Z. Some combination of the RED, GREEN,
and BLUE indicators will be lit, telling you where the
problem is.
ERROR INDICATOR
ERROR
This indicator illuminates if there is a software problem
with the QCR-Z or the host. Some combination of the
RED, GREEN, and BLUE indicators will be lit, telling you
where the problem is.
2-3 QCR-Z Operator's Guide Version 4
Controls and Connectors