Installing The Control Panel (R730Xd) - Dell PowerEdge R730 Owner's Manual

Figure 96. Removing and installing the control panel—PowerEdge R730xd
1. screw (3)
3. hard-drive backplane
5. plastic pull tab
Next steps
1. Replace the control panel. See
2. Follow the procedure listed in

Installing the control panel (R730xd)

Prerequisites
1. Ensure that you read the
2. Keep the T15 Torx screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
176
Installing the control panel
After working inside your
Safety instructions.
2. control panel
4. connector
(R730xd).
system.