Installing The Hard-Drive Tray - Dell PowerEdge R730 Owner's Manual

Figure 22. Removing and installing the hard-drive tray
1. hard-drive tray handle (2)
3. hard-drive indicator
5. backplane signal cable
7. guide pin on the chassis (4)
Next steps
1. Replace the hard-drive tray. See
2. Follow the procedure listed in

Installing the hard-drive tray

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
NOTE: Systems that support the internal hard-drive tray support low-profile heat sinks and do not
support a cooling shroud.
62
Installing the hard-drive
After working inside your
Safety instructions.
Before working inside your
2. hard drive (4)
4. SAS cable
6. backplane power cable
tray.
system.
system.