Setup Menu Operations - Sony PXW-FS7 Operating Instructions Manual

Setup Menu Operations

Press the MENU button to display the setup menu
in the viewfinder to specify various items for
shooting, recording, and playback (menu can also
be displayed on an external monitor).
Menu controls
MENU button (page 9)
Turns menu mode for setup menu operations on/
off.
Left button/Right button (page 9) and SEL/SET
dial (page 9)
Press the left/right button to move the cursor left/
right to select menu items or settings.
Turn the SEL/SET dial to move the cursor up/
down to select menu items or settings.
Press the SEL/SET dial to apply the selected item.
CANCEL/BACK button (page 9)
Cancels a setting before it is applied, and moves
one level up in the menu hierarchy.
Note
The setup menu cannot be operated when in focus
magnifier mode (page 37).
Setting menu items
Turn the SEL/SET dial to move the cursor to the
menu item to set, then press the SET/SEL dial to
select the item.
• The menu item selection area displays up to
eight lines. If the available options for an item
cannot be displayed at the same time, scroll the
display by moving the cursor up/down.
• If an item has a large range of available options
(Example: –99 to +99), the selection area is not
displayed. The current setting is highlighted to
indicate that the value can be changed.
• Selecting [Execute] for a function will execute
the corresponding function.
• Selecting an item that requires confirmation
before execution will temporarily hide the menu
and display a confirmation message. Check the
message, and then select whether to execute or
cancel the function.
Entering a character string
When you select an item, such as a file name,
which requires character entry, the character
entry screen appears.
1
Turn the SEL/SET dial to select a
character type, the press the dial.
ABC: Uppercase alphabetic characters
abc: Lowercase alphabetic characters
123: Numeric characters
!#$: Special characters
2
Select a character from the selected
character type, then press the dial.
The cursor moves to the next field.
Space: Enters a space character at the cursor
position.
T/t : Moves the position of the cursor.
BS: Deletes the character on the left of the
cursor (backspace).
3
When finished, select [Done] and press
the dial.
The character string is confirmed and the
character entry screen disappears.
56